Root G900AUCU2AND3 Samsung Galaxy S5 (G900A)

If you already installed the OTA update G900AUCU2AND3 Samsung Galaxy S5 SM-G900A and now wants to retain root, this will cover how to root it correctly.  As I seen some few people have had ended-up into soft-bricking their phone while installing root, so I decided to put this up as a  word of advise to keep your phone safe in-case you are about to root your phone.


As you may know, the G900AUCU2AND3 OTA update includes some patches, to the recent root app found by Geohot and that so-called Towelroot.  The "Towelroot" was is indeed worked on previous  G900AUCU1ANCE 4.4.2 stock firmware, but it is not covered anymore due to the Towel root's capability and limitation.  This limitation was already addressed by the developer himself that it can only support phones with software build version not exceeding on June 3 2014.  So every phones that already received the OTA update right after June 3, 2014 the root exploit will no longer work, as simple as that to consider.



So if I already updated to G900AUCU2AND3 OTA update, how can I root then?
No you can't root the G900AUCU2AND3 update as there is no , but as the root app clearly emphasized that it will worked on on updates before June 3, 2014 and was already proven to work with the old G900AUCU1ANCE, so  all you need is revert back your phone to the old 4.4.2 G900AUCU1ANCE Stock Firmware from the current 4.4.2 G900AUCU2AND3 OTA update on your Samsung Galaxy S5 SM-G900A. It may sound sound too easy but it also take a lot of work to do so just to regain root.

Again this is only a guide and I am not encouraging you to do so, I'm just pointing you the right direction to keep your device safe. But if you badly needs root just read this guide here thoroughly and grab the full stock firmware G900AUCU1ANCE. Once you carefully revert back your phone to NCE stock firmware, try to root again using towelroot. Just let me know if you have something to ask.

Source: XDA-developers

Easy Root AT&T Samsung Galaxy S5 Active SM-G870A on 4.4.2 G870AUCU1ANE4

Do you need root on your AT&T Samsung Galaxy S5 Active? Here's the simplest root method without even using a computer and you may then have a rooted phone in just a few minutes. This root method uses Geohot's Towelroot that has already tested  with Galaxy S5 flagship but also works on AT&T Galaxy S5 Active.

In addition, all you need is grab the towelroot.apk file and install it on your phone. You also need the latest SuperSU app so you can update the SU binary and so you a have a working root.

Note: Rooting your phone will void it's service warranty. So if you care enough about your phone’s warranty don’t touch it. This guide is intended for advanced users only. Use this guide at your own risk.

How to Root G870AUCU1ANE4 4.4.2 KitKat on AT&T Galaxy S5 Active SM-G870A


The root may only work on the firmware build number 4.4.2 G870AUCU1ANE4, as there is a limitation to the Towelroot and it may or may not work on any latest software updates ahead from June 3rd 2014. This means that the towelroot was only build on firmware builds not exceeding to the said date. If you forcefully do so, then it's up to you.


As I mentioned, this root method is so very easy,  all you need is run your the browser app like Google Chrome on your AT&T Galaxy S5 Active SM-G870A then you can simply go to towelroot website and download the towelroot apk. Install it and decline what the warning message tells you. Once downloaded run the the towelroot.apk then  hit the button called “Make It Rain”. From there you may then manually install the SuperSU so you can update the SU binary. Grab it from Chainfire or at Play Store. If you need more tweaks, you can also install Busybox and Xposed framework. If you want to confirm that the root was properly installed you may then use the Root checker app from Play Store.

Step by step guide:


1.) enable the "Allow to install apps from unknown sources" by going to Settings>>Security and then check the box next to Unknown Sources.
2.) Open your phone's intenet browser, then type the website address towelroot.com.
3.) Tap the Lambda sign from the website to begin downloading the towelroot.apk
4.) Locate the towelroot.apk  run it then then  simply click the button called “make it rain”. Wait until it finishes and the phone reboot.
5.) Update the SuperSU app from chainfire website and lastly install it.

So that’s it! Just let us know if this root method perfectly worked on your AT&T Galaxy S5 Active SM-G870A running on Android 4.4.2 G870AUCU1ANE4 KitKat update. For further information if this root method truly worked then head-over to the

If you have doubt about this root method that might not truly worked then head-over to the source link below.

Source: XDA-Developers

Sprint Galaxy S5 Sport 4.4.2 G860PVPU1ANG2 Factory Stock Firmware

As Sprint has announced the availability of the new Samsung Galaxy S5 Sport starting July 25, well the stock firmware has already emerge and being dubbed with software build number G860PVPU1ANG2. Sprint Galaxy S5 Sport is named with model number SM-G860P so the firmware build starts with G860P and currently based on Android 4.4.2 KitKat.


So for those advance users and after-market developers this is your chance to get to get a sneak peak of what inside of the new GS5 Sport. Again, don't play the firmware unless you know where to and how to use a stock firmware. The stock firmware has been useful for future use , in-case someone might root the device and needs it for returning back the device to it's original default settings

Grab it from below source:
Version: Android 4.4.2
Baseband version: G860PVPU1ANG2
Kernel version: 3.0.4-2096006
Build number: KOT49H.G860PVPU1ANG2
AP: G860PVPU1ANG2
CP: G860PVPU1ANG2
CSC: G860PSPT1ANG2
Download

The Samsung Galaxy S5 Sport is almost identical to the flagship Galaxy S5, which was introduced this year and it much likely the same to AT&T's Galaxy S5 Active.    In addition to these hardware specifications, it is also water and dust resistant. It includes the 5.1-inch 1920x1080 resolution AMOLED display, Qualcomm Snapdragon 801 processor, 2GB of RAM, 2800mAh battery.

The Sprint Galaxy S5 Sport also comes with Samsungs S Health app pre-installed. Sprint also launched a new feature for GS5 customers called Sprint Fit Live.The S Health app lets users access health information and map out workouts.  While the Sprint Fit Live will consolidate all the fitness information and apps that GS5 users are accessing on their device.

Galaxy S5 G900F Update G900FXXU1ANG2 Improved Fingerprint Sensor

New firmware  update on Samsung Galaxy S5 SM-G900F that bumps to firmware build number G900FXXU1ANG2. The G900XXU1ANG2 is still packed in Android 4.4.2 KitKat but it brings a lot more smoother and snappier user experience.  Some noticeable changes is the fingerprint sensor which as  lot better now and show less errors than before. You can also see the new unlock pattern which the  color one has changed while it also has new lock screen previews that tells you what effect you choose when you select lock screen effect.

The G900FXXU1ANG2 is now available in select countries, such as Philippines and Sri Lanka, as we spotted on Kies. This is a similar software update we have seen earlier in Singapore with build number G900FDXU1ANG1 but might as well and sooner available on other countries.  So you better check for this update now, again it's only available for select countries and the roll out might be in stages.

G900FXXU1ANG2 Firmware Info:


Here are the build info of the 4.4.2 update build version G900FXXU1ANG2 Galaxy S5 SM-G900F:

Android version: 4.4.2 (KitKat OS)
Baseband version: G900FXXU1ANG2
Kernel version: 3.0.4-2091818
Build number: KOT49H.G900FXXU1ANG2
PDA: G900FXXU1ANG2
CSC: G900FOXA1ANG1
PHONE: G900FXXU1ANG2
Build Date: July 2014
Release Date: July 2014


Currently available in Philippines and Sri Lanka, but might also available to other countries in Europe these following couple of days. Below are the simple guide on how to upgrade your Samsung Galaxy S5 to Android 4.4.2 G900FXXU1ANG2.

Update: The G900FXXU1ANG2 has also available in Europe and Middle East countries. Just read on below for the updated list of  the G900FXXU1ANG2 4.4.2 update to see if you country has it too.


How to Upgrade the Galaxy S5 SM-G900F to the latest 4.4.2 Software Update


Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Backup important data – You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900F may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to  G900FXXU1ANG2 4.4.2 via Over-The-Air (OTA)


 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900F Settings>>About Device, tap Software Update.
  • Find “Software update”
  • Slide your finger down the display starting from the top edge of your mobile phone.
  • Tap the settings icon.
  • Tap About device.
  • Tap Software update.
It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900FXXU1ANG2 Through Kies


The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900F and other Samsung devices running with Android 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900F to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

If you already received this update, just do shed us some info on how the G900FXXU1ANG2 4.4.2 software update performs on your Samsung Galaxy S5 SM-G900F.

G900HXXU1ANG3 Galaxy S5 SM-G900H 4.4.2 Update Southeast Asia Release

Are you rocking the Samsung Galaxy S5 (SM-G900H Exynos) type?  And you lived in Indonesia, Vietnam and Cambodia, then you are about to see a new software update to build version number G900HXXU1ANG3. The new software update dubbed as 4.4.2 G900HXXU1ANG3 will replaced the previous build 4.4.2 G900HXXU1ANE2, as usual every updates brings an improved system stability,  bug-fixes and security enhancements.

Technical details of G900HXXU1ANG3


Android version:4.4.2
Baseband version:G900HXXU1ANG3
Kernel version:3.0.4-2109283
Build number:KOT49H.G900HXXU1ANG3
PDA:G900HXXU1ANG3
CSC:G900HOLB1ANG1
PHONE:G900HXXU1ANG3

Confirmed countries available so far:
  • Cambodia
  • Indonesia
  • Vietnam
  • and Kazakhstan

So just manually check the update  via over-the-air or using Samsung Kies for software upgrading. Below are just a simple guide from where you can update your Galaxy S5 to the latest software update. The update may only takes several minutes to download as it has around 200 MB in size.

How to Upgrade the Galaxy S5 SM-G900H to the latest 4.4.2 Software Update


Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Back important data – You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900H may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to  G900HXXU1ANG3 4.4.2 via Over-The-Air (OTA)


 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900F Settings>>About Device, tap Software Update.
  • Find “Software update”
  • Slide your finger down the display starting from the top edge of your mobile phone.
  • Tap the settings icon.
  • Tap About device.
  • Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900HXXU1ANG3 Through Kies




The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900H and other Samsung devices running with Android 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900H to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

If you already received this update, just do shed us some info on how the G900HXXU1ANG3 4.4.2 software update performs on your Samsung Galaxy S5 SM-G900H.

G900FDXU1ANG1 Galaxy S5 SM-G900F 4.4.2 KitKat Update Release in Singapore

New Android 4.4.2 KitKat hitting Singaporeans Samsung Galaxy S5 LTE SM-G900F. The new software update dubbed with firmware build G900FDXU1ANG1 and provides a much higher changelist as we compare to the previous 4.4.2 G900FXXU1ANE2 update.  The G900FDXU1ANG1 is now made available in Samsung Kies firmware server for both Singapore's unbranded and branded Samsung Galaxy S5 G900F phones.  As usual, there are no official changelog  has yet announced about the new 4.4.2 G900FDXU1ANG1  update,  so make sure to find it and observe how the update performs.

In addition some folks already received the G900FDXU1ANG1 says that it adds an improved system stability, security enhancements and bug-fixes, while the features stays the same and no other major changes. Advanced users also acknowledge  that they are struggling to root the new 4.4.2 G900FDXU1ANG1 using towelroot, this scenario is not new since once in a while a new update arrived it includes user's security enhancements.



(see details here)

G900FDXU1ANG1 Firmware Info:


Here are the build info of  the 4.4.2 update build version G900FDXU1ANG1 Galaxy S5 G900F:

Android version:4.4.2 (KitKat OS)
Baseband version:G900FDXU1ANE2
Kernel version:3.0.4-2091818
Build number:KOT49H.G900FDXU1ANG1
PDA:G900FDXU1ANG1
CSC:G900FOLC1ANG1
Phone:G900FDXU1ANE2
Build Date: July 1st 2014


How to Upgrade the Galaxy S5 SM-G900F 4.4.2  to the latest 4.4.2 Software Update


Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone's battery - You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Back important data - You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone's memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900F may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to 4.4.2 G900FDXU1ANG1 via Over-The-Air (OTA)


 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900F Settings>>About Device, tap Software Update.
  • Find "Software update"
  • Slide your finger down the display starting from the top edge of your mobile phone.
  • Tap the settings icon.
  • Tap About device.
  • Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to 4.4.2 G900FDXU1ANG1 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it (guide for installation) in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900F and other Samsung devices running with 4.3, 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900F to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

If you already received this update, just do shed us some info on how the G900FDXU1ANG1 4.4.2 software update performs on your Samsung Galaxy S5 SM-G900F.

Canadian Samsung Galaxy S5 G900W8 New Android 4.4.2 Update G900W8VLU1ANF3

Canadian Samsung Galaxy S5 users are about to see the new Android 4.4.2 KitKat OTA update the brings the software build version G900W8VLU1ANF3. The new G900W8VLU1ANF3 is now held available to all Candian carriers, including Rogers, Bell Mobility, Telus, Wind, Virgin-Mobile and among other carriers. There are no other reports or official announcements has yet to come but the 4.4.2 G900W8VLU1ANF3 is out there and are ready to be pushed as we already spotted it on Samsung Kies firmware server. It might to roll out in phases on the next 24 hours or on the next couple of days.

As I already mentioned that there is no official release note about this update, so we aren't have no idea of what benefits could it bring on the Samsung Galaxy S5 SM-G900W8. The firmware packaged is still in Android 4.4.2 but one thing for sure this might add some few improvements to the device. So better try to perform a manual check under your Galaxy S5 Settings >> System update >> Update Now.
You can also do a manual software update check via Samsung Kies if yo have Kies 3 installed on your computer.

Here are the software build info of the
G900W8VLU1ANF3:


Device: Samsung Galaxy S5
Model number: SM-G900W8
Android version: 4.4.2
Baseband version: G900W8VLU1ANF3
Kernel version: 3.0.4-1947824
Build number: KOT49H.G900W8VLU1ANF3
AP: G900W8VLU1ANF3
CSC: G900W8VLU1ANF3
CP: G900W8OYA1ANF3

The new 4.4.2 G900W8VLU1ANF3 will replaced the previous 4.4.2 G900W8VLU1AND1. So make sure that your Samsung Galaxy S5 N900W8 device has not been rooted prior to received the OTA update, or otherwise if your device has root or has been modified you may faced software update failures and you may need to unroot your Samsung Galaxy S5 N900W8 so you can received the OTA update again.

If anyone out there might perhaps already got the new 4.4.2 G900W8VLU1ANF3 KitKat update, just do share us some info so your fellow Canadian Samsung Galaxy S5 users may know how the update performs or might have any other new features you have found on it.  I'll just update this post if can gather additional info about this update.

G900HXXU1ANE2 Galaxy S5 SM-G900H 4.4.2 Firmware Updates on May, June & July 2014

The Samsung Galaxy S5 SM-G900H (Exynos type) has yet received another Android 4.4.2 KitKat update dubbed as firmware build number G900HXXU1ANE2 . The new 44.2 G900HXXU1ANE2 has seen rolled out all over in Russia, Middle East, Africa, Latin America and Asian countries, this has been gradually released by Samsung and giving its way to replaced the previous Android 4.4.2 G900HXXU1ANCI, and the 4.4.2 G900HXXU1ANCD.  The 4.4.2 G900HXXU1ANE2 update will add some improvements and security enhancements on the international Samsung Galaxy S5 SM-G900H,  the features may still the same but brings a better UI usability and performance.

Technical details of G900HXXU1ANE2?


This is what we got in Russia, Ukraine and Uzbekistan’s Galaxy S5 SM-G900H

Europe 4.4.2 G900HXXU1ANE2


Android version:4.4.2
Baseband version:G900HXXU1ANE2
Kernel version:3.0.4-1539356
Build number:KOT49H.G900HXXU1ANE2
AP:G900HXXU1ANE2
CP:G900HXXU1ANE2
CSC:G900HOXE1ANE2

Middle East & Africa 4.4.2 G900HOJV1AND4


Android version:4.4.2
Baseband version:G900HXXU1ANE2
Kernel version:3.0.4-1539356
Build number:KOT49H.G900HXXU1ANE2
CP:G900HXXU1ANE2
CSC:G900HOJV1AND4

Latin America 4.4.2 G900HUUB1ANE2



Android version:4.4.2
Baseband version:G900HXXU1ANE2
Kernel version:3.0.4-1539356
Build number:KOT49H.G900HXXU1ANE2
CP:G900HXXU1ANE2
CSC:G900HUUB1ANE2

Asia 4.4.2 G900HODD1AND2


This is the firmware build details found on Galaxy S5 SM-G900H in Asia.


Android version:4.4.2
Baseband version:G900HXXU1ANE2
Kernel version:3.0.4-1539356
Build number:KOT49H.G900HXXU1ANE2
CP:G900HXXU1ANE2
CSC: G900HODD1AND2


These are the list of Galaxy S5 SM-G900H Android 4.4.2 firmware build G900HXXU1ANE2  4.4.2 Firmware updates on every countries.
Note: It ay not completely covered but might only give you some idea to where it is available for now.

How to Update the Galaxy S5 SM-G900H to the latest 4.4.2 G900HXXU1ANE2 Software Release


Update to G900HXXU1ANE2 4.4.2 via Over-The-Air (OTA Update)


There are two types you can update your Samsung Galaxy S5 the first method is firmware update through over the air or called as OTA update, which usually a notification message will directly sent to you and saying that there is a new update available for download. You can also tap on your Galaxy S5 SM-G900I  Settings>>General tab, scroll to and tap System Update. It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900HXXU1ANE2 4.4.2 via Kies


The second method is a firmware update through Samsung Kies. You may head-over to your local Samsung support page from where you can download Samsung Kies from there, and install it (guide for installation) in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900I and other Samsung devices running with 4.3 ,4.4.2 and up OS . Once you installed Kies 3, all you need is connect your Galaxy S5 to the computer using the USB cable, then simply run and follow the Kies on-screen software update instructions.

Important Things you should do first before Performing a Software Update


According to Samsung you should prepare the following things before performing the software update. I will also add some useful insights why you should follow this procedures.

You should make sure your battery is fully charged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.
You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happens and it forces you to perform a factory.

Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Samsung Galaxy S5 SM-G900H may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ you should try to avoid that from happening.

If anyone happens to be from Australia  and have had managed to received this update, just do share to everyone how’s your first impression on the G900HXXU1ANE2 4.4.2 update on your Galaxy S5 G900H. You may check everything, from new features it might have, network to data connectivity, speed, smoothness and don’t forget about the battery life performance.